Transcript: Autodesk (ADSK) Q2 FY27 Earnings Call Conference

On behalf of all of us, I wish Amy the very best in her well earned retirement. Janesh, over to you to discuss our quarterly financial performance and guidance.

Financial Performance

JANESH MOORJANI, CHIEF FINANCIAL OFFICER, AUTODESK: Thanks, Andrew.

Q2 was another strong quarter. Overall, the underlying momentum of the business was consistent with prior quarters, with strength coming from similar industry segments in AECO, particularly in Construction and Emerging Markets. Overall, the impact from our sales reorganization was in line with the range of outcomes we had expected. The Americas, APAC, Eastern Europe and The Middle East are normalizing a little earlier than Western Europe. The overall impact to new subscription growth was once again within the range of our expectations, while the linearity of billings during the quarter was better than we expected.

Renewal rates remained strong. Total revenue in the second quarter grew 16% as reported and 14% in constant currency. As expected, the new transaction model provided a tailwind of roughly two percentage points to revenue growth in the second quarter. Please see the tables in our press release, earnings deck, and Excel financials for details by product and region. Billings increased 10% as reported and 12% in constant currency.

The impact of the new transaction model on billings growth was not significant in the second quarter. During the second quarter, we sustained our program of reducing multiyear discounts established over the last few years, including winding down multiyear renewals for the maintenance to subscription program. We continue to expect the reduction of discounting for multiyear contracts to benefit price realization over time, while also temporarily weighing on unbilled deferred revenue and RPO growth. Turning to margins. Second quarter GAAP and non-GAAP operating margins were 29% and 41%, respectively.

GAAP operating margin increased approximately four percentage points, primarily due to underlying margin improvements and a further reduction in stock based compensation as a percent of revenue. Non-GAAP operating margin was up approximately two percentage points. This primarily reflected operating leverage and the benefits from our sales optimization. Second quarter free cash flow was $561 million, reflecting the timing of billings and collections during the quarter. Moving on to capital allocation.

Capital Allocation

We repurchased approximately 2.1 million shares during the quarter for $453 million. We continue to expect our share buyback in fiscal 2027 to be similar to fiscal 2026 in total dollars. We expect to maintain a healthy buyback program that continues to apply approximately 50% of free cash flow to further reduce share count over time. Before I turn to guidance, a quick update on a few minor changes we are making to simplify our revenue presentation and reflect the acquisition of MaintainX. There are no changes to our income statement revenue presentation. We are making some minor changes to our product family revenue presentation to reflect the acquisition of MaintainX, and going forward, we will stop disclosing design and make revenue, consistent with our strategy of converging workflows end to end and expanding our business and operations.

We will continue to provide regular commentary on construction, Fusion, and operations, and will also disclose MaintainX revenue for four quarters to help you track the performance of those businesses. The slide deck on our website summarizes these changes.

Guidance

Let me finish with guidance. Our guidance philosophy is unchanged. Our guidance continues to be based on the range of possible outcomes in our bottom up sales forecast, which is grounded in the momentum of the business and embeds some prudence against our expectations of sales productivity normalization.

We’ve assumed the macroeconomic environment will remain broadly stable through the year. Our guidance now includes the billings, revenue and operating and net financing costs from MaintainX for approximately six months of fiscal 2027. We expect MaintainX to contribute approximately $60 million to second half fiscal 2027 revenue and approximately $70 million to second half fiscal 2027 billings, both weighted slightly towards the fourth quarter given the growth profile of the business. As we have now largely concluded the new transaction model implementation, we will focus our commentary on as reported numbers in future earnings calls. As a reminder, the tailwind to revenue growth from the new transaction model in the first half of the year translates to approximately a 1.5 percentage point tailwind to revenue growth for the full year.

For billings, we’ve raised our fiscal 2027 billings guidance to a range of $8.575 billion to $8.65 billion to reflect the contribution from MaintainX and an underlying improvement in our expectations, partly offset by mixed assumption on the contribution from the new transaction model and foreign exchange. For revenue, we’ve raised our fiscal 2027 revenue guidance to a range of $8.295 billion to $8.345 billion to reflect the contribution from MaintainX, our strong results in the second quarter, and an underlying improvement in our expectations. For GAAP operating margin, we revised our fiscal 2027 guidance to a range of 25% to 27%, primarily to reflect the GAAP accounting effects of the MaintainX acquisition. For non-GAAP operating margin, our fiscal 2027 guidance is unchanged, reflecting higher underlying margin from operating leverage and benefits from our go to market optimization, offset by the margin dilution from the MaintainX acquisition. We expect fiscal 2028 non-GAAP margins to improve modestly from 39% in fiscal 2027, with underlying improvement partly offset by the annualization of MaintainX operating costs.

We remain on track to achieve 41% non-GAAP operating margin in fiscal 2029. And for free cash flow, we’ve narrowed our fiscal 2027 expectation to a range of $2.725 billion to $2.75 billion reflecting stronger underlying expectations, offset by the operating and net financing costs for MaintainX and approximately $45 million of transaction expenses related to the acquisition of MaintainX. We continue to manage our stock based compensation with discipline. We expect stock based compensation as a percent of revenue to be about 9% in fiscal 2027, which is within our targeted range and down from about 11% in fiscal 2026. In summary, we remain disciplined and focused on the controllable factors that drive our revenue, operating margin, earnings per share and capital allocation, which are the key building blocks of free cash flow per share.

The slide deck on our website has modeling assumptions for the third quarter and full year fiscal 2027. Andrew, back to you.

Strategy and AI Progress

ANDREW ANAGNOST, CHIEF EXECUTIVE OFFICER, AUTODESK: Thank you, Janesh. Autodesk is focused on creating project intelligence powered by the convergence of our platform, industry clouds and AI. For our customers, convergence increases efficiency and resilience and reduces risk and downtime so they can deploy fewer resources to every project and bid on and win more projects with the resources they have.

Let me give you some examples of our progress in the quarter that demonstrate how this differentiated strategy works. An ENR Top 400 U.S. general contractor selected Forma for construction over a competitive solution for cost management, preconstruction and model coordination, driven by our differentiated platform value. Similarly, Rudolph Libbe Group, another ENR Top 400 general contractor, selected the Forma Operations Bundle in a competitive new logo win to standardize workflows from preconstruction through project delivery supported by an ERP integration.

In Europe, a leading infrastructure and construction company renewed and expanded its enterprise agreement with Autodesk to accelerate digital transformation and low carbon and energy efficient delivery, including using Autodesk Platform Services to build custom applications for a major transit infrastructure program. In India, a large municipal corporation replaced disconnected solutions with Autodesk AEC Water Infrastructure and Forma offerings to connect civil design, hydraulic modeling and project delivery for a new water treatment plant. These stories have a common theme, creating project intelligence by converging people, processes and data across the project life cycle to increase efficiency and resilience, decrease risk and prepare for an agentic AI world. It also extends Autodesk’s growth potential as the continued strong performance of our construction business demonstrates. We see even greater potential in operations.

In manufacturing, customers are demanding convergence as they invest in their digital transformation to leverage granular and unified data and embrace the AI driven automation capable of industry transformation. By consolidating on our platform, customers have the flexibility and connectivity across workflows to increase agility, innovation and resilience. For example, a leading German manufacturer standardized on the Product Design and Manufacturing Collection in Vault to unify fragmented engineering data and streamline proposal and project delivery. U.S.-based Central State Industrial expanded its use of Autodesk Vault and Fusion to connect critical data and workflows, improving access to project information, streamlining operations and creating a scalable foundation to manage rapidly growing job volumes and support continued growth.

Another German manufacturer selected Fusion to replace a legacy CAD/CAM solution with an integrated design and manufacturing environment, including five axis machining. And The Williams Company, an American precision machine shop, is using nearly the full breadth of Fusion’s manufacturing capabilities, from cloud tool libraries to simultaneous multi axis machining and automated probing, to modernize and standardize CNC programming across its shop floor. As you can see from these examples, our customers are using more of Fusion’s functional breadth with larger installations and design through make convergence to drive strong growth.

AI Strategy

Let me finish by talking about AI. AI is what increasingly turns this connected data and context into actionable project intelligence.

It promises to ease endemic capacity constraints, raise the bar on what’s possible in the physical world and help our customers do more with scarce resources. To realize that promise, our customers need AI that becomes an active participant in their workflows. They don’t want AI that is merely impressive. They want AI that is accurate, fast enough to stay in the flow of work and affordable enough to use every day. Delivering all three at enterprise scale is hard.

Accuracy, speed and affordability are often competing constraints. We believe trust is earned by how those trade offs are managed. The future of AI won’t belong to the company with the best single model, it will belong to the platform that combines the richest context with the right models to deliver the best outcomes for customers. That’s where Autodesk is uniquely positioned. We bring together decades of industry experience, rich life cycle data spanning design, make and operate and context that connects that information into a shared understanding of our customers’ workflows.

We combine probabilistic AI with deterministic engineering, grounding intelligence in the realities of the physical world. We complement those advantages with a common AI platform that can leverage the right model for the right task, from trusted third party and frontier models to Autodesk built models like Neural CAD, purpose built to reason directly about geometry and design data. And we’re building that platform to be open, allowing customers and partners to bring their own intelligence into Autodesk workflows. We complement all of this with commercial innovations that make AI practical and affordable for customers of every size. Those capabilities reinforce one another.

Richer context improves accuracy. Intelligent model orchestration improves speed. Platform scale and vertical specific models improve affordability. Together, they earn the trust our customers place in us to deploy AI in their most critical workflows. As more of that intelligence, ours, our customers and our partners connects to the platform, those advantages continue to compound.

Every project now leverages historical project data and creates more knowledge. Every asset generates more operational intelligence. Every operational insight improves the next generation of design, engineering and operations. That continuous feedback loop of project intelligence is creating a durable competitive advantage for Autodesk, and more importantly, an enduring advantage for our customers. That’s why we believe AI is more than a feature or a product cycle.

It’s a fundamental transformation in how the world’s infrastructure, buildings, products and factories will be imagined, built, operated and continuously improved. And because Autodesk sits at the intersection of these workflows with the data, context and experience to bring them together, we believe we’re building the platform and ecosystem that will define the next generation of AI for the built world. Advantage is that we can create product intelligence across the asset lifecycle by converging design, make and operate through a continuous flow of data, context and experience. We’re excited to tell you more about our plans at Autodesk University in a few weeks’ time. Operator, we would like to open the call up for questions.

Q&A Session

OPERATOR: Thank you. Our first question comes from the line of Saket Kalia of Barclays. Your line is open, Saket.

ANALYST: SAKET KALIA, BARCLAYS: Okay, great. Hey guys, thanks for taking my questions here.

Andrew, I want to pick up on your last line of commentary there at the end, which I thought was interesting. And really through your prepared remarks, you talked about project intelligence a bit. And I want to loop that into some of your product families a bit. And maybe the specific question is, how does the operational data for MaintainX create what kind of seems like a data advantage for Autodesk AI when you combine it with the design, the build data that you have? So sorry, there’s a lot there, but does that make sense?

ANDREW ANAGNOST, CHIEF EXECUTIVE OFFICER, AUTODESK: Yeah, I think that makes a lot of sense. So first off, let me kind of just elaborate on project intelligence a little bit. There’s a lot of decisions that happen in context of project from design into make and construction or into manufacturing. All of these decisions have reasons. They have intent associated with them.

Project intelligence captures all this in a continuous way. And what we’re doing with MaintainX is we’re actually extending that intelligence into the asset’s life cycle, which means we’re going to be able to capture information and data about how the asset functions in the real world. That is incredibly valuable data because the assets that we’re talking about here, buildings, airports, conveyor belts, machines, they’re all built by our customers. So that actually closes the loop on the asset cycle and on the context associated with that. So that’s going to allow us to not only train on data about design processes and building processes and manufacturing processes, but also how assets are used and feed that back into the larger cycle.

It just increases the value of the cycle overall for our customers.

ANALYST: SAKET KALIA, BARCLAYS: Got it. Very helpful. Janesh, maybe for my follow-up for you. You talked a little bit about guidance philosophy in your prepared remarks.

I was just wondering if you could talk a little bit about maybe how we should think about the levels of prudence built into the Q3 and full year guide?

JANESH MOORJANI, CHIEF FINANCIAL OFFICER, AUTODESK: Hey, Saket, I’m happy to do that. So broadly speaking, our guidance philosophy remains unchanged. And just to recap that briefly, the guidance is grounded in the momentum of the business and what we know today. We reflect the opportunities we see and then we incorporate some level of prudence around the areas where there may still be some variability.

So at the start of the year, our guidance had contemplated a much wider range of outcomes, particularly around the impact of the sales reorganization on new business productivity. And six months into the year, the impact from the reorg has largely remained within the range we expected. Renewals have been very strong. The business has performed much better than our initial assumptions in many areas. And so we’ve reflected all of that in the outlook.

We flowed through the first half revenue outperformance, and we’ve also raised our expectations for the back half in both billings and revenue based on what we’ve seen so far. There is naturally less uncertainty today compared to the past because we’re only forecasting the remaining six months of the year. But at the same time, we’ve also got work ahead of us in the second half. We have our largest EBA renewal cohort, as you know, with a concentration in Q4. And we’re also focused on the pace of new business productivity normalization, particularly in Western Europe.

So the guide reflects that. It reflects the better visibility we have and the remaining work in the back half. But importantly, we’ve had a terrific first half. We are very pleased with the progress we’ve made so far, and we are very confident in our fiscal 2027 outlook.

ANALYST: SAKET KALIA, BARCLAYS: Thank you.

OPERATOR: Our next question comes from the line of Joshua Tilton of Wolfe Research. Your line is open, Joshua.

ANALYST: JOSHUA TILTON, WOLFE RESEARCH: Hey, guys. Can you hear me?

ANDREW ANAGNOST, CHIEF EXECUTIVE OFFICER, AUTODESK: Yes. We can. Hey, Josh.

ANALYST: JOSHUA TILTON, WOLFE RESEARCH: Awesome. How are you guys? Maybe I’ll stick with Janesh since he was on the line prior.

First one is just give us a little bit of clarification. I think we’re getting some inbounds on, how much exactly was the revenue and the billings raised for the full year inorganically versus the organic contribution. I know that you gave us the inorganic contribution dollars in the press release, but can you just help us fully clarify the math on just by how much organically you raised revenue and billings for the full year?

JANESH MOORJANI, CHIEF FINANCIAL OFFICER, AUTODESK: Yes. I’m happy to, Josh.

So maybe I’ll just start with billings. The underlying billings outlook improved by about two percentage points. One point of that comes from MaintainX, which is approximately $70 million. And roughly one point comes from just stronger underlying performance that we had in the business. There’s an offset on that, which is we had a little bit of headwind from currency and transactional model mix. And so that offsets about one point.

So netting those two translates to about a one percentage point improvement. So said another way, when you think about our prior guidance, excluding the new transactional model and excluding currency, that prior guide was 8% to 9% year over year growth. Now that has increased to 9% to 10% year over year growth on an organic basis and tack on a point for MaintainX, so that’s 10% to 11% year over year growth. So that’s the underlying increase in terms of the billings. And then in terms of the revenue, we’ve — you saw that we had a pretty healthy outperformance in Q2, which we then flowed through to the rest of the year.

And the specific contribution from MaintainX on billings is only $60 million. And we’ve raised our organic revenue number by much more than that, as you can see from the direct math there.

ANALYST: JOSHUA TILTON, WOLFE RESEARCH: Super helpful. And then maybe one for Andrew, I’ll preface the question with — you can’t answer along the lines of, you know, we can’t pick between our favorite children type answers. But I couldn’t help but notice that M&E is getting put into a bucket called “other,” and all the other segments seem to have a very nice representative name. Is there any reason investors should take that as a signal of maybe less strategic focus on that area of the business than you might have previously had?

ANDREW ANAGNOST, CHIEF EXECUTIVE OFFICER, AUTODESK: No, you shouldn’t. Look, the M&E business is definitely going under a lot of changes. It’s going through a lot of transformations here. But the structure of the M&E business, the high end studio is what they need from us. That work is continuing.

We’ve actually extended our product portfolio in very interesting ways for this segment. They are embracing Flow Capture, some of the tools in Flow Studio. So our higher end business is definitely embracing the new technologies we’re — going. And we’re also expanding the business to grab the new creator economy that’s kind of building around that. That’s where Flow Studio leads.

So there’s nothing you should read into that other than it’s just a smaller business. And it’s easier to capture it in another bucket with the operation solution. That’s all you should read.

ANALYST: JOSHUA TILTON, WOLFE RESEARCH: Super helpful, guys. Congrats on a great quarter.

ANDREW ANAGNOST, CHIEF EXECUTIVE OFFICER, AUTODESK: Thanks, Josh.

OPERATOR: Thank you. Our next question comes from the line of Adam Borg of Stifel. Please go ahead, Adam.

ANALYST: ADAM BORG, STIFEL: Awesome. And thanks so much for taking the questions. Maybe the first question, Andrew, just on MaintainX. Obviously, the deal now closed. What’s been early customer feedback on your move to go deeper into operations? And maybe talk about the top R&D and sales and marketing priorities now that it closed?

And I have a follow-up after.

ANDREW ANAGNOST, CHIEF EXECUTIVE OFFICER, AUTODESK: Yes. So let me talk about customer reaction in general. When you look at a lot of our customers, especially in the general contracting space and even in the architecture space and certainly in the manufacturing space, they’re all very interested in either improving operations internally for themselves or extending their businesses into operations in some way. Having Autodesk help them do that and having Autodesk do it in such a way that we’ve closed the loop around design, make, and operate is very attractive to a certain segment of our customer base.

And they’re looking into this and engaging with us on some of these things. We’re also seeing lots of synergies with our enterprise accounts. And I think you’ll continue to see that just like we did with construction. In terms of where we’re at with the integration, it’s very early. We just closed the acquisition early in August.

Our main focus right now is on integrating the back office and maintaining the momentum in the business. And that’s where our goals are right now. As you look forward, we’re certainly going to have synergies in the business, like I said, around the enterprise accounts. We’re going to be able to bring MaintainX into those accounts very much like we did in construction. Again, similar to construction, we’re going to be able to bring the MaintainX business to Europe.

Another thing that’s also a significant opportunity here is MaintainX has been primarily focused on the manufacturing sector. We can bring them more robustly into the AEC sector. And all of that is on top of the new virtuous cycle we’re going to be building around design, make and operate. That gives you a sense for where we’re at and some of the reactions.

ANALYST: ADAM BORG, STIFEL: That’s really helpful.

And at the end of your prepared remarks, when you talked about kind of the AI platform, the platform you’re building and the AI advantages, you did also talk about, you know, you’re building your own AI models, which I’m sure we’ll hear more about — today, you in a couple weeks. But I think you also talked about there are roles for frontier models as well. So I’d love to hear how you’re thinking about, and I’m sure this will evolve over time, but today, how are you thinking about the role of Autodesk built Neural CAD models versus frontier models and both as you think about design and make? Thanks.

ANDREW ANAGNOST, CHIEF EXECUTIVE OFFICER, AUTODESK: Yeah.

So what our customers need, Adam, is they need fast answers that are accurate. By accurate, I mean precise, especially in our world. It’s a built world. I’ve often said that probably right is wrong in our world, but they also need cost effective solution. So what we’re looking to do is we’re looking to use the right model for the job.

And that’s going to include a full breadth of different types of models. We’re not locked into any one type of model. We’ll use a frontier model where it’s appropriate for a particular type of answer the customer may need. We’ll use one of our models when a precise kind of data driven answer associated with direct context into what they’re designing and making is appropriate. And we’ll use other models where we see appropriate in order to drive the right kind of cost effective behavior for our customers.

And we’ll do this in such a way that we’re always leveraging the data we have, the context we have about the customer, and we’re packaging it in an experience that actually makes sense for design and make. When you bring all of those things together, you get a sense for what we’re doing. We’re going to bring the right tools to the right problem at the right time to the customer, but it’s always, always about using our data, our context and the experience we deliver to our customer to give fast, accurate and cost effective answers.

ANALYST: ADAM BORG, STIFEL: Thanks again. Really helpful.

OPERATOR: Thank you. Our next question comes from the line of Jay Vleeschhouwer of Griffin Securities. Please go ahead, Jay.

ANALYST: JAY VLEESCHHOUWER, GRIFFIN SECURITIES: Thank you. Good evening.

Andrew, for you first. Your comments about project intelligence were exactly what I had in mind to ask you about based on your recent article on LinkedIn. The question there is actually twofold. One part of that is it’s a very AEC biased oriented comment thus far. How do you see taking that technology or that concept into manufacturing?

And does the fact that you have much lower market share in manufacturing than you do in AEC perhaps influence how you’re thinking about that? And then the other Project Intelligence part of that question before I turn to Janesh is, does this whole concept in any way have any implications for product packaging? You’ve been very bundles and collections oriented to date. I mean, does that necessarily have to change?

ANDREW ANAGNOST, CHIEF EXECUTIVE OFFICER, AUTODESK: First off, let me address the question around project intelligence and AEC.

Projects exist everywhere. Every manufactured product is a project inside of the company. They’ll call it a project. They’ll have a project code name, right? So project is a generic term for capturing the entire life cycle of information flow from design through either construction or manufacturing all the way into the operations of the asset.

So this is not something that is reserved to the AEC space nor is it intended to be reserved to the AEC space in our framing. In fact, frankly, some of the deepest usage we’re seeing with some of our AI is in our manufacturing product set, in Fusion in particular. Fusion’s continuing to enjoy robust growth partly because we’ve closed the loop for an entire project from design to manufacturing and now edging into operations, especially in the factory world. So this is not something targeted at AEC in any way, shape, or form. And it certainly is relevant to what’s going on in manufacturing.

On our product packaging, we’ve said many times over time that you’re going to see us evolving from task based automations to workflow based automations, all the way up to system level automations for our customers. Ultimately, what you’re seeing us move to is the industry clouds, Fusion, Forma and Flow is the main way we deliver capabilities to our customers. Subscriptions are still going to be highly relevant for those customers. But over time, as we move into deeper workflow automations, deeper automations around systems, you’re going to see us get involved in more and more consumptive efforts. That obviously changes the way people consume the functionality within Fusion, Forma and Flow in the future.

And you should expect as this evolution progresses, customers are more exposed to the functionality and the capabilities from Autodesk, bringing to bear what they need and what they need to accomplish to the table and bringing the right functionality there at the right time. You’ll probably hear a little bit more about this at AU.

ANALYST: JAY VLEESCHHOUWER, GRIFFIN SECURITIES: Okay. For Janesh, any meaningful update with regard to usage telemetry, that is in terms of geos or verticals, collection versus standalone, any sort of metrics around that set of data?

JANESH MOORJANI, CHIEF FINANCIAL OFFICER, AUTODESK: Jay, I’d say overall, we are seeing pretty healthy engagement across the board.

That is very consistent with the strength that we delivered across the business. We see that across geo verticals as well as the individual products. But I would be a little bit careful not to over interpret any one signal, just because usage can be influenced by things like project timing and seasonality and mix and so forth. But the broad patterns that we are seeing are very consistent and similar to what we’ve seen earlier. And the uplift dynamics suggest that customers are continuing to deepen their adoption over time.

So we’re very pleased with that.

ANALYST: JAY VLEESCHHOUWER, GRIFFIN SECURITIES: Thank you.

OPERATOR: Our next question comes from the line of Joe Vruwink of Baird. Your line is open, Joe.

ANALYST: JOE VRUWINK, BAIRD: Great. Thank you and congrats, Amy, on a great career. I think by now I’ve watched all the “fable one-shotting CAD” videos out there. They’re all fun. But I think most often when I look at the CAD environment, it tends to be Fusion, which is the one actually doing the magic. So I guess my question is whether you’ve seen evidence of user growth accelerating for applications like Fusion that have MCP connections into an LLM environment.

ANDREW ANAGNOST, CHIEF EXECUTIVE OFFICER, AUTODESK: What I will say is the Fusion business is doing quite well. We’re very happy with the results for Fusion. We’re seeing not only continued growth in user acquisition, continued growth in ACV and revenue, but we’re also seeing continued growth in multi seat purchases, which is exactly what we want to see. The reasons for this are very clear. We’ve been very deliberate in leading with some of the new automations, leading with MCP connectors.

All of these things you’re seeing in the ecosystem, people using various tools with Fusion are quite deliberate and quite intentional on our part in terms of driving the strategy. We’ve been very AI forward with Fusion and not only with regards to the ecosystem, but also with regards to the functionality we’ve built. And like I said earlier, our customers on the Fusion side are some of the most deeply engaged with our Assistant and the AI features inside the product. This is absolutely a tailwind to Fusion growth, and we expect that tailwind to continue.

ANALYST: JOE VRUWINK, BAIRD: All right, great. Thank you for that. And then hoping you can comment on your approach to API pricing and how thinking has evolved. I think there were some tweaks recently here in August where you listened to customer feedback and maybe changed some of the timing. Just curious kind of what the feedback has been and how you’re thinking about this going forward.

ANDREW ANAGNOST, CHIEF EXECUTIVE OFFICER, AUTODESK: Yes. I think that’s a great question. Customers are very much aware that we’re going to be charging for APIs and machine based usage. We’ve actually already charged for some of that usage. We do listen to customers. We do adjust some of our timelines and our intents to make sure that we’re matching with customer expectations and customer ramp up times.

But you continue to look for us to charge for access to machine driven usage to our capabilities, our IP and our products. That’s not going to change.

ANALYST: JOE VRUWINK, BAIRD: Thank you.

OPERATOR: Thank you. Our next question comes from the line of Brent Thill of Jefferies.

Your line is open, Brent.

ANALYST: BRENT THILL, JEFFERIES: Thanks, Andrew. Many of your software peers are unveiling AI revenue. I don’t know if it’s important to you, maybe it’s found in other ways. But how do you think about the impact?

And is this something you expect that you want to talk about going forward?

ANDREW ANAGNOST, CHIEF EXECUTIVE OFFICER, AUTODESK: Yeah. I want to go back to the framework for AI monetization that we rolled out last year around task based automation, workflow automation, and systems level automation. Right now, what we’re doing is we’re enabling lots of task based automation in the product, lots of AI driven automation. It’s basically built into some of the subscription offerings we have.

And like I’ve said, it’s actually a tailwind to Fusion growth right now. People notice what we’re doing and they like it. And it’s a very active point of conversation in the Fusion community. I think you should look at the task based automations as not only a lubricant but an accelerant to some of the subscription based businesses as we move forward, and we’ll treat it as such. But as time goes on and we move deeper into workflow automation, systems level automation, you’re going to see us start to express more consumptive revenue.

That’ll show up through Flex business and other things that are also embedded in how we’re reporting in our industries. So look for us to evolve these things over time. We’re not trying to do one off presentations of some of these things. We’re trying to drive real value in our business with our customers through our work on project intelligence. Janesh, do you want to add anything?

JANESH MOORJANI, CHIEF FINANCIAL OFFICER, AUTODESK: No, I think that’s a good summary.

ANALYST: BRENT THILL, JEFFERIES: And for Janesh, I know you’re calling for gross margins to be flat. Many of the other companies we all follow are seeing some compression because of AI. I guess what you’re saying is you can embrace some of these tasks and still keep GMs flat.

JANESH MOORJANI, CHIEF FINANCIAL OFFICER, AUTODESK: We can this year, Brent, and that’s what we’ve factored into the model.

Over time, as the AI based workloads and offerings continue to grow, those will be gross profit dollars accretive, but they will put a little bit of compression on gross margin. But that’s one of the things that we had also factored into our long term operating margin target when we rolled that out. So that is embedded in the 41% margin target for fiscal 2029.

ANALYST: BRENT THILL, JEFFERIES: Great. Thanks.

OPERATOR: Thank you. Our next question comes from the line of Elizabeth Porat of Morgan Stanley. Your question please, Elizabeth.

ANALYST: ELIZABETH PORAT, MORGAN STANLEY: Great. Thank you so much for the question. So first, I wanted to continue on the line of some of the pricing dynamics. And I believe in early June, you lowered the Flex minimum purchase from $3.99 to make it more accessible for SMBs. So while it’s still early, I’d love to better understand what you’re seeing thus far, whether any changes in new logo activation, repeat token purchases or lower checkout abandonment, how the change can be economically accretive?

JANESH MOORJANI, CHIEF FINANCIAL OFFICER, AUTODESK: Yes. So we are actually seeing down market changes in adoption based on those Flex changes. The customers really wanted access. That was a customer driven change. Customers wanted access to tokens in smaller bundles that matched how they were going to work.

We view this as part of the long term strategy around Flex. Integrating Flex deeper into our business, allowing customers to access all the capabilities in the portfolio, and also allowing them to mix and match how they drive occasional use of one product versus deep usage of their other products. So yes, we have seen some acceleration in adoption of Flex and it has been net accretive to the business, which is great. That will be something we continue to do on an ongoing basis. So watch that space over time.

ANALYST: ELIZABETH PORAT, MORGAN STANLEY: Great. And then just as a follow-up on this sales reorganization, what are some of the leading indicators that you’re seeing now in terms of rep productivity, pipeline creation or some of the time to ramp that improved in Q2? And maybe what are some of the ones that you’re still looking to turn the corner? And how are you looking at signs just to confirm that the disruption has peaked and more of that risk is actually behind us now?

JANESH MOORJANI, CHIEF FINANCIAL OFFICER, AUTODESK: Yes. So Elizabeth, I’ll kind of echo what I said in my opening commentary. One of the places we’ve seen actual real productivity increases, and it was one of the places we were targeting, is in renewal business. Our renewals are much more productive now, both internally and through the channel partners. And that was a major goal of what we were trying to do — increase productivity of the renewal business, shift more effort into expansion business, new business generation in both the channel and internally inside the company.

We’ve also seen all the green shoots associated with the expansion business internally and with the channel. The one area that I highlighted is, and this is because of consultation periods and all the things associated with mature Europe, it’s been a little slower to ramp up on the expansion business. We’re seeing the signs, we’re seeing continued growth in pipeline associated with kind of forward looking indicators that tell us we’re moving in the right direction. But that’s the dynamics right now. We’re seeing exactly what we expected with a slower buildup in mature Europe.

ANDREW ANAGNOST, CHIEF EXECUTIVE OFFICER, AUTODESK: And maybe, Elizabeth, the one thing I would add to that is, in terms of the specific measures that you look for with respect to new business productivity, it’s — are sellers able to make their plan and how are they ramping against their plan? And we saw strength in that in Q2 in most of the areas around the world where they were much closer to plan. And it’s a lot better than it was in Q1.

ANALYST: ELIZABETH PORAT, MORGAN STANLEY: Great. Thank you so much.

OPERATOR: Thank you. Our next question comes from the line of Jason Celino of KeyBanc Capital Markets. Please go ahead.

ANALYST: JASON CELINO, KEYBANC CAPITAL MARKETS: Great. Thanks for taking my question. I just wanted to ask about your EBA visibility.

I think in prepared remarks, Janesh, you said that this was kind of a factor of maybe varying scenarios of what you could see this year. I’m curious, like as we approach the second half, what types of renewal activity or expansion activity you’re seeing with some of your cohorts?

JANESH MOORJANI, CHIEF FINANCIAL OFFICER, AUTODESK: Jason, fiscal 2027 includes our largest EBA renewal cohort, and there’s a big concentration of those EBAs in Q4. And if I think about that in terms of just cohort dynamics, you’ll recall that last year we had the biggest product subscription renewal cohort, and we also had our second largest EBA cohort. So there are — it does create a little bit of a tough year on year comp in terms of those size of the renewal cohorts in the back half of the year.

What I’d say is the prior full year outlook already reflected all of these cohort dynamics, and we’ve executed really well so far in terms of things — business that we closed in Q2 and preparation for the back half. And that gave us the confidence to raise the outlook for the year on billings even on an underlying basis.

ANALYST: JASON CELINO, KEYBANC CAPITAL MARKETS: I see. Okay. And then maybe it’s more of a — relevant point.

I know you reiterated your operating margin guide. But now that MaintainX has closed, curious what might be the operating margin impact in the quarter of the year or maybe historically what the margin profile looked like before you acquired it?

JANESH MOORJANI, CHIEF FINANCIAL OFFICER, AUTODESK: Thank you. Yes. MaintainX is a high growth business when we acquired it and still is.

And consistent with many high growth businesses, as you might imagine, the business was not profitable. And so as we bring MaintainX into Autodesk, our main focus is to ensure that we do everything that we can to continue to preserve the strong growth rate and continue to fuel the engine. So MaintainX does present a drag on operating margin in fiscal 2027. And then next year, we’ll have the full year annual cost of MaintainX from an operating perspective and also in terms of the net financing costs. But despite that, as I mentioned in my prepared remarks, as I think about next year, we do expect that we will increase the operating margin next year from the 39% that we have this year.

ANALYST: JASON CELINO, KEYBANC CAPITAL MARKETS: Perfect. Thanks, Josh.

OPERATOR: Thank you. Our next question comes from the line of Taylor McGinnis of UBS.

Please go ahead, Taylor.

ANALYST: TAYLOR MCGINNIS, UBS: Yes. Hi. Thanks so much for taking my question. So you’ve done a nice job sustaining a consistent level of growth.

But as we look beyond fiscal 2027, Autodesk is going to start to lap a few tailwinds related to the model change and the transition to annual billings and a couple of the larger renewal cohorts that you talked about, which have all been beneficial to underlying growth. So as we think about that, is it possible that, that at some point starts to become a headwind to billings growth? And if not, maybe you could just talk about the incremental growth drivers that you’re excited about that could help support the growth durability that we’ve seen. Thanks.

JANESH MOORJANI, CHIEF FINANCIAL OFFICER, AUTODESK: Taylor, this is Janesh. Maybe I’ll take that question. As we think about fiscal 2028, there’s a number of different moving parts, as you mentioned, and it’s a little bit early to talk about 2028, but I’ll at least just highlight some of those moving parts for you. First off, as you know, fiscal 2027 has some benefit from the new transaction model that will not recur in fiscal 2028. So that’s one factor to consider.

And 2028 will also include the full year contribution from MaintainX, as I mentioned, both in terms of the top line as well as the expenses. We’ll also have the continued normalization of new business productivity, where as we continue to get better in Western Europe and the rest of the world, that will ultimately be a driver of the business for us. But underneath all of those moving pieces, the core drivers of the business remain strong. Renewals are strong. EBAs are strong.

We are seeing sustained demand across areas like construction and infrastructure and industrial. We’re excited about the opportunities in operations, both in terms of organic as well as continuing to build on the MaintainX acquisition. So all of those factors, the consistent execution that we’ve had as a company for a while now for the past few years and that we’re delivering here in fiscal 2027, I think all of those underlying drivers will help us continue to sustain strength into 2028 as well. We’ll obviously give you a more full picture of all of the moving parts and timing and mix impacts and so forth when we get to that point. But the important piece for now is that fiscal 2027 is playing out nicely.

We’ve raised our guidance on both billings and on revenue, and we feel very good about the underlying momentum of the business.

ANALYST: TAYLOR MCGINNIS, UBS: Perfect. Thank you so much.

OPERATOR: Thank you. Our next question comes from the line of Ken Wong of Oppenheimer and Company. Please go ahead, Ken.

ANALYST: KEN WONG, OPPENHEIMER AND COMPANY: Great. Thanks for taking my question. Andrew, I wanted to circle back to MaintainX.

So now that you guys are integrating it into the business, how should we think about some of the go to market motions that might need to be tweaked? How much of the direct sales force will be impacted? Is this something that you guys will be able to push through to your partner network? Any color there and the possibility of any disruptions from the integration that you guys are baking into guidance?

ANDREW ANAGNOST, CHIEF EXECUTIVE OFFICER, AUTODESK: Yes.

We certainly bake lots of things into the guidance to make sure that we’re prudent in terms of what we tell you. At a high level, short term goal is maintain the momentum of the business. Very clear, okay? We want to make sure that we maintain the momentum of the business. A good business.

It’s adding customers at a nice clip. We want to maintain some of that. Like I said earlier, just like what we did in construction, the enterprise account business is an immediate opportunity for synergies with regards to engaging deeper with some of those customers and getting MaintainX into some of those accounts. Frankly, they’re not in those accounts. So I think there’s a big opportunity there and we want MaintainX to be able to exploit that avenue in terms of getting to our customers.

They’ve also built a great product led machine that’s targeting customers and new account acquisition. We want to maintain and leverage that machine for Autodesk, not only for MaintainX, but broadly across the Autodesk portfolio and look for us to do that because that expertise is valuable and their product led growth motion works incredibly well. Partners are absolutely going to be an opportunity here. Partners are going to be interested in this, especially as we start expanding the business into Europe. We’ll probably be looking at motions with regards to engaging our partners.

Again, very similar to what we did with construction. So look for us to basically copy some of the motions we did in the early days of construction when we bought PlanGrid and we bought BuildingConnected, but also learn from some of those motions and actually accelerate them faster than we did back in the days of construction.

ANALYST: KEN WONG, OPPENHEIMER AND COMPANY: Got it. Super helpful. Janesh, I wanted to touch on that prior point you made about slight margin improvement in fiscal 2028.

I recall you guys had embedded kind of — not necessarily MaintainX specifically, but the possibility of M&A into the guidance kind of this year and longer term. Should we think something similar for 2028 — should you guys kind of bundle on something on top of MaintainX after the fact that, that slight margin improvement has some cushion?

JANESH MOORJANI, CHIEF FINANCIAL OFFICER, AUTODESK: Ken, the way I would think about future acquisitions and the impact of those is just to go back to our overall approach in terms of operations. We are following the same playbook as we did in construction, where we laid down a cornerstone acquisition and then built around that with smaller tuck in acquisitions. And for us in operations, MaintainX was that cornerstone acquisition.

And future acquisitions will probably be smaller in size, and we’ll just build around that. So I would look at the fiscal 2028 guidance on operating margin more specifically when we get to that point. But I would expect at this point that it will be an improvement over the 39% that we’ve laid out here for you today.

ANALYST: KEN WONG, OPPENHEIMER AND COMPANY: Okay. Perfect.

Thank you.

OPERATOR: Thank you. Our next question comes from the line of Matt Martino of Goldman Sachs. Please go ahead, Matt.

ANALYST: MATT MARTINO, GOLDMAN SACHS: Yeah.

Thanks for taking the questions. Andrew, maybe to start with you. As Autodesk moves from task level AI towards broader workflow automation, what in your mind are the key technology and data unlocks still required? And where do you believe the platform is furthest along today?

ANDREW ANAGNOST, CHIEF EXECUTIVE OFFICER, AUTODESK: Yeah.

The key thing that drives the workflow automations is what we’re building into the Assistant. The Assistant is kind of the integration layer that allows us to bring the context we have about what the customer is doing at each spot and also bring the right models to bear. So the more that the users engage with the Assistant, the deeper they engage with the Assistant, the more workflow driven automations we introduce in. You’ll see some indications of that at AU, but the front door for these things is the Assistant and its agentic layers that we built out there. The deeper the usage there, the more you’re going to see us extending into the workflow side of the expansion there.

And what was the second part of your question? I’m sorry. Could you repeat that, Matt?

ANALYST: MATT MARTINO, GOLDMAN SACHS: Yeah, where the platform is furthest along today.

ANDREW ANAGNOST, CHIEF EXECUTIVE OFFICER, AUTODESK: Okay.

Fusion is definitely one of the areas where we’ve invested quite a bit of effort to get the platform integrating various capabilities. The Assistant, obviously, is part of the core platform that’s built horizontally across Autodesk. But Fusion has definitely moved aggressively to deliver value through the Assistant so that the customers can start to look at workflow type automations and actually engage in workflow type transactions. I think you’ll see some of those showing up first in Fusion.

ANALYST: MATT MARTINO, GOLDMAN SACHS: Great.

And if I could just slip in a quick one on the macro, Andrew. The broader construction backdrop has been fairly uneven, but Forma for construction seems to be showing pretty good momentum here. So maybe just unpack sort of what’s driving that resilience and where you’re beginning to see maybe even early signs of improvement across some of these pockets in the end market? Thank you.

ANDREW ANAGNOST, CHIEF EXECUTIVE OFFICER, AUTODESK: So we’re super happy with our construction business.

It’s growing north of 20%. We like what we see. I want to be super clear about a few things here. We’re very diversified. We’re diversified globally.

We’re diversified across all the segments of construction. That diversification is an absolute strength. The other thing is construction is kind of reverting back to the mean in terms of backlogs. We’re completely fine with that because the real underlying driver of growth is not the oscillations in the various metrics you’re seeing. It’s the fact that the penetration of technology in construction is so low right now.

What’s driving our business right now is people like what we’re doing. They like what they’re getting from design and make integration. They like what we’re doing with preconstruction. They’re adopting technology at higher rates because technology allows them to deal with their backlog, to unlock their capacity, and be able to build things more sustainably across the whole spectrum of customer types that we serve. That’s the underlying thing here is the technology adoption cycle.

It’s not the ups and downs of what you see with various metrics in the construction space.

OPERATOR: Thank you. Our next question comes from the line of Tyler Radke of Citi. Your line is open.

ANALYST: TYLER RADKE, CITI: Yes. Thanks for taking the question.

Maybe just at a high level, like with these disclosure changes, Janesh, I guess why now, why sort of midway through the year? And I think there’s a lot of good momentum in the construction business. You talked about a leading organization choosing Autodesk construction this quarter. So can you just be a little bit more specific on how you’ll be updating us on the progress of that and the metrics that you’ll share?

JANESH MOORJANI, CHIEF FINANCIAL OFFICER, AUTODESK: Tyler, I’m happy to.

In terms of the why now, it’s really got to do with the launch of the operations business. With closing of MaintainX, we needed to revisit our product family reporting. So that’s the short answer on the why now. But as I think about that design and make, ultimately, our focus is on driving convergence across design, make, and operate. And the more successful we are with that strategy, the less sense it makes to have discrete buckets on design and make and other things.

So construction is reported today under the make business, but even that doesn’t entirely capture all the construction business. And so it’s really important for us to make sure that as we move forward, we are providing you with a view on how the underlying businesses are performing. So we will provide you with regular updates on that business. It will be regular commentary. Just like we have today, we will tell you how the business has been growing.

It’s growing north of 20% and has done for some time. And then specific to Fusion and Operations, we’ll also provide you with regular commentary on those. And then as I said, we will provide MaintainX revenue for four quarters to give you visibility into how that business is doing.

ANALYST: TYLER RADKE, CITI: Great. And on the MaintainX front, just sort of thinking about your goals from a financial perspective and synergies.

I think at the time of the acquisition you talked about 50% plus growth, $135 million or so of ARR, if I’m not mistaken. Like is your goal to meaningfully reaccelerate that? Obviously, you don’t want to disrupt a lot of the momentum they have, but at the same time, you have massive distribution and probably a lot of customers that could get value by deploying MaintainX. So how should we just think about those revenue synergy goals over the next couple of years?

JANESH MOORJANI, CHIEF FINANCIAL OFFICER, AUTODESK: Yes.

MaintainX already has very strong standalone growth momentum, Tyler. And for us, the strategic value that it gives us is the new operational entry point into teams that are responsible for maintaining and operating assets every day. I think there’s multiple vectors in terms of revenue synergy opportunities. The first is extending MaintainX through our global reach across customers of all sizes. So there are significant geographic opportunities in terms of expansion.

But there’s also opportunity with many of our larger enterprise customers and elevating MaintainX’s presence in those accounts. We also see the ability to extend across different industries. A lot of MaintainX’s customers today are more manufacturing centric, but there’s a massive opportunity across AEC as well. And then ultimately, connecting operations workflows through the design and make platform into Operate and closing that full life cycle, so customers can manage across the entire life cycle. And all of those things help us.

In addition to that, we talked about the benefits in terms of how that accelerates our overall AI strategy as well. So there’s all of those revenue synergy vectors. But as you mentioned, I think the most important piece for us is to make sure that we first preserve the existing growth rate and that we very thoughtfully and deliberately expand over time across these vectors to continue to deliver greater growth in that business.

ANALYST: TYLER RADKE, CITI: Thank you.

Closing Remarks

OPERATOR: That is all the time we have for Q&A today. I would now like to turn the conference over for closing remarks.

ANDREW ANAGNOST, CHIEF EXECUTIVE OFFICER, AUTODESK: Thanks, everyone, for joining us. We’ll look forward to seeing many of you on the road or at conferences over the coming weeks. If you have any questions in the meantime, please contact me or my team.

Thanks so much.

OPERATOR: This concludes today’s conference call. Thank you for participating. You may now disconnect.

Related Posts

• Transcript: Howard Lutnick Interviews Nvidia CEO Jensen Huang at G20 Innovation Summit
• Transcript: Ciena Corp (CIEN) Q3 2026 Earnings Call
• Transcript: lululemon athletica (LULU) inc. Q2 FY26 Earnings Call
• TRANSCRIPT: Broadcom Inc (AVGO) Q3 FY26 Earnings Call
• TRANSCRIPT: Hewlett Packard (HPE) Q3 FY26 Earnings Call